SMARC Evaluation Carrier 2.1
The SMARC Evaluation carrier 2.1 is designed to allow embedded application developers to get up and running quickly on the SMARC modular platform, giving them a head start on the total system design. Simply select the SMARC module best suited for your application needs, install the module and you are ready to get started.
The SMARC Evaluation Carrier is compliant with the SMARC module 2.1.1 specification and supports a broad range of interface options dedicated for low power applications including 2x Gigabit Ethernet support, SD-card socket, USB 2.0 and 2x 3.1 (USB-C and Type A), mPCIe, PCIe and many more.
The implementation of LVDS, HDMI and DP++ allows multimedia applications, that have never been possible on SMARC before. The intelligent audio implementation allows also HDA on X86 and I2S on ARM platforms to be used on the same audio connectors. MIPI CSI camera support as well as 14 GPIOs increase the flexibility for highly sophisticated applications.
Compliance | Accepts SMARC™ 2.1 and 2.0 Modules 82mm x 50mm and 82mm x 80mm |
Dimensions (H x W x D) | 210mm x 200mm |
Graphics | Dual Channel LVDS alternative eDP HDMI DP++ |
Ethernet | 2x GbE ports with integrated magnetics |
Audio | I2S Audio Codec (for ARM based modules) HDA Audio Codec (for X86 based modules) |
Hard Disk | 1x SATA + SATA Power SD Card connector |
USB | 1x USB 2.0 OTG 1x USB 2.0 1x USB 3.X Type A 1x USB 3.X Type C 2x USB connected to mPCIe |
PCI Express / PCI support | 2x miniPCIe with SIM card support 2x PCIe |
Additional | 4x UARTS 2x CAN 14x GPIO 2x MIPI CSI camera interface |
Power Supply | 12 V single supply optional 3.0 - 5.25 V for module only |
Datasheet SMARC Evaluation Carrier 2.1
[ smarc-evaluation-carrier21_20231031_datasheet.pdf, 3.98 MB, Nov.02.2023 ]
SMARC Evaluationcarrier 2.1 Userguide
[ smarc_eval-carrier-21_user-guide_rev0-2_2023-06-16.pdf, 8.73 MB, Jun.16.2023 ]
General Safety Instruction
[ general-safety-instructions.pdf, 628.88 KB, Aug.02.2024 ]
SMARC™ module 2.1
[restrictions apply]
This paper discusses how SMARC™ module is continuing to evolve to ensure system designers, SIs and OEMs can meet the ongoing challenges of cost-effectively deve-loping next generation small form factor IoT- andAI-enabled embedded systems.
Modules and Motherboards WP [restrictions apply]
Robotic-Assisted Surgery White Paper [restrictions apply]
The tough choice of Processors
Solving challenges in selecting computer boards & modules for IIoT projects. In this article we support you to make the right choice for your application: To find the best balance of processing power, graphics capabilities and connectivity on the one hand and size, power consumption, and cost on the other.
[ artikel_processor-choice_eu-1-.pdf, 4.42 MB, Apr.20.2023 ]
A SMARC Approach to Medical Device Life Extension
A medical manufacturer maximizes investment in essential system with retrofit Kontron Computer on Module solution upgrade.
[ uc_medical-smarc_final.pdf, 8.69 MB, Apr.20.2023 ]
Tech Specs SMARC
[ tech-spec_smarc.pdf, 5.3 MB, Apr.04.2024 ]
Kontron Services Brochure
[ kontron-services-brochure.pdf, 8.9 MB, Dec.17.2020 ]
All other downloads such as drivers, bios, drawings etc. are available on Kontron’s Customer Section
There are currently no products in your Comparison.
Take advantage of our full-service approach
To find out more about our services go to services pages