Kontron's 3u VPX Single Board Computer VX3058 is based on the highly integrated 8-core Intel® Xeon® D architecture, supporting Dual 10 Gigabit Ethernet, high bandwidth PCI Express 3.0, and high speed DDR4 memory. It is consequently SWaP-C optimized with versatile mezzanine options for XMC, storage, graphics, M.2, and I/O. Combined with Kontron's advanced switch technologies and VxFabricTM for significantly higher I/O bandwidth, and combined with centralized health management, VX3058 is simply the best choice for high performance embedded computing platforms.
VX3058 brings server class applications into the battlefield
Typical programs are :
VX3058 and leading edge architecture for Multi-CPU computing nodes
VX3058 provides two 10 GBASE-KR ports and 8 lanes Gen3 PCI Express to the backplane. A 10 Gigabit Ethernet switch and a PCI Express Switch can be complemented with two respective single star data planes. Thanks to Kontron VxFabricTM, a unique API extends the TCP/IP protocol over the PCI Express infrastructure. Kontron’s sample turnkey system StarVX implements this architecture, enabling a significantly higher I/O bandwidth. While computing power has been continuously increasing in the past, and I/O bandwidth did not, the balance of both is back again by Kontron StarVX. VX3058 makes it a powerful, leading edge Multi-CPU computing node architecture.
Long term programs: high reliability and low Total-Cost-of-Ownership
Kontron provides a Long Term Supply program service (LTS) for over 15 years. Intel communicates silicon reliability is 10 years. A comprehensive Health Management is optionally available to support easy field maintenance. All this makes the VX3058 the ideal candidate for long term programs.
|Processor||Intel® Xeon® D-1500 Octa Core™, TDD 35W, 1.6/1.7 GHz (8 execution cores, 16 threads, 12 MB)
DDR4 dual channel memory with ECC, 2133 Mbits/s over 144 bits, up to 16 Gbytes
PCIe gen3 x8 ports to VPX and XMC, up to 8 GT/s
|Form Factor||3U VPX, 1’’ (5HP)
Slot profile: SLT3-PAY-2F2U-14.2.3, SLT3-PAY-1F1F2U-14.2.4, SLT3-PAY-1F1U-14.2.10
|Main Memory||Up to 32 GB dual channel DDR4 SDRAM running at 2133 MT/s, with ECC, soldered|
|Available I/Os||Front Panel
USB: 1x USB 2.0 port
GIGABIT ETHERNET: 1x RJ-45 connector: 10/100/1000BASE-T Ethernet Note: This port is configurable from the BIOS to be routed to the VPX rear connector
HDMI (OPTION): HDMI connector as option. This includes a HDMI front-I/O module and a M.2 mezzanine for 2D graphics. Remark: HDMI front I/O and XMC support are exclusive.
SERIAL: 1x RJ-11 connector: Two EIA-232 interfaces or one EIA-485 interface without hardware flow control
LEDS: 5 LEDs reporting the board CPU health status and activity
RESET: Push button
PCIe: x8 PCIe 3.0, non-transparent capability, on P1. Configurable as 1 x8, 2 x4, or 4 x2
SATA: 2 SATA 6 Gb/s links on P1, 2 additional SATA 6 Gb/s links on P2
USB: 2 USB 2.0 and 1 USB 3.0 port on P1, 1 additional USB 2.0 link on P2
UART: Two serial lines (Rx, Tx only) on P2, for RS-232 or RS-422/485 dynamically configured
Ethernet: Two 10GBASE-KR or 1000BASE-KX on P1, one 1 1000BASE-T on P1, 2nd 1000BASE-T on P2 (both front/rear switchable, onboard magnetics)
GPIO P1: GPIO1, GPIO2/Maskable reset, OpenVPX GDISCRETE1, VBAT
GPIO P2: SYSCON. 2x multiplexed GPIO3/4 or SFI I2C
Video: DVI port on P2 as option. This includes a M.2 mezzanine for 2D graphics.
|Security||Dual secure elements, TPM and Wibu, which can be enhanced with Kontron SEC-LINE product|
|Watchdog||PLD-based, timeout ranging from 2 µs to 510s, IRQ, Reset, dual-stage|
|Flash||2x16 MB FLASH, with recovery image and uEFI BIOS settings|
|Power Supply||On P0: VS1=12V and 3.3V_AUX; VS2 not used; VS3=5V not used; -12V_AUX for XMC slot option|
|Drives||60 GB SSD M.2 Option|
|Cooling||Air, Extended Temperature Air, and Conduction-cooled options|
Octo-Core VPX Server Blade
[ vx3058-datasheet-08-2017.pdf, 1.55 MB, Jun.28.2018 ]
VME-VPX shortform catalog
[ shortform-vme-vpx-05-2018.pdf, 2.27 MB, May.16.2018 ]
Kontron Modular Computers S.A.S. Service and Support Offering
This data sheet contains a detailed description of all the support and service offering from Kontron Modular Computers S.A.S, including the Long Term Supply (LTS) Services.
[ support-brochure-03-2018.pdf, 894.71 KB, Jun.28.2018 ]
VX3058 User's Guide
[ cadtb25-10e-vx305x-ug.pdf, 9.26 MB, Mar.04.2021 ]
VX305x AMI BIOS User Reference Manual
[ sddtg50-5e-vx305x-bios.pdf, 3.68 MB, Feb.12.2018 ]
VX305x PBIT User's Manual
[ sddtg51-0e-vx305x-pbit-ug.pdf, 1.06 MB, Sep.11.2017 ]
General Safety Instruction
[ general-safety-instructions.pdf, 560.72 KB, Jan.04.2021 ]
VXFabric White Paper
[ whitepaper_en_vxfabric-v2-final.pdf, 5.87 MB, Nov.27.2013 ]
Kontron Services Brochure
[ kontron-services-brochure.pdf, 8.9 MB, Dec.17.2020 ]
All other downloads such as drivers, bios, drawings etc. are available on Kontron’s Customer Section
There are currently no products in your Comparison.
To find out more about our services go to services pages