ETX® Eval

ETX®-Eval, ATX sized evaluation board for ETX® modules.
Specifications
  • ETX® Evaluation board
  • Offers standard PC environment
  • Reference Design and prototype plattform
  • Integrated Debug Port
Download Datasheet

The ETX® Eval is an ATX motherboard, which fulfills all user requirements. Additionally to the typical interfaces like IDE, FDD, parallel and two serial ports, the board offers a RJ45 Ethernet and two additional USB ports. Common used receptacles make it easy to connect speakers or microphones directly. The motherboard is expandable via four PCI and three ISA slots and is equipped with both ATX and BabyAT power connectors. This allows the usage of nearly every available power supply. As a special feature, the board offers a standardized FFC connector for LVDS panels. A custom cable adaptation for LVDS displays is not neccessary, simple “plug and work“.

The absolute highlight is the scaleable processor performance. Due to four defined high count plugs it is possible to work with different processor modules. From AMD Geode™ up to Intel® Core™2 Duo and all future CPU technology can be inserted. The expensive replacement of the whole motherboard is obsolete and makes upgrading pretty easy.

This modularity recommends the ETX® Eval as the ideal carrier board to evaluate the ETX® concept. Even before the completion of the target system is done, the software and application development can be started in advance.

Features

Ethernet 10/100 MBit from Module (RJ45) and onboard 10/100/1000 MBit Intel® LAN (RJ45)
Form Factor ATX form factor, four PCI slots, three ISA slots
Mouse PS/2 mouse connector
Keyboard PS/2 keyboard connector
Hard Disk 2 x IDE ports
1 x FDD port
Serial 2 x Serial ports (DSUB9 male)
Parallel Port 1 x Parallel port (DSUB25 female)
Panel signal 1 x DSUB 15 VGA connector
1 x Dual Channel LVDS connector JILI (depending on module)
Audio Stereo Line in / out 3,5 mm jack-plug
USB 4 x USB Ports, 2 on 4pin USB A connector and 2 on internal pin header
Power Supply 20 pol. ATX power connector and BabyAT power supply
Temperature Operation: 0° to 60°C
Storage: -25° to 85°C
* Ask about extended temperature ranges
Humidity 93% relative Humidity at 40°C, non-condensing
(according to IEC 60068-2-78)
Dimensions (H x W x D) 166 mm x 130 mm
PCI 4 x PCI slots
ISA 3 x ISA slots
Expansion 1 x PCI slot 32 Bit
Single PC-Card slot, 32 bit with ejector

Downloads

Datasheets

ETX® Eval‚ Datasheet
Datsheet for ETX® Evaluation Board
[ datasheet_etx-eval.pdf, 0.92 mb, Aug 31, 2017 ]

Manuals

ETX® eval board‚ short Reference
[ ada8k117.pdf, 0.32 mb, Sep 11, 2017 ]

White Papers

ETX Thermal Management
[ thermalmgt_v002rkf_6.pdf, 0.26 mb, Nov 27, 2013 ]

ETX® Design Guide, Rev. 2.4
Kontron Design Guide for ETX® Modules, Document Revision 2.4
[ etxdesignguide124.pdf, 0.87 mb, Nov 27, 2013 ]

ETX® Specification V3.02
Specification for ETX® Modules, V. 3.02
[ etxspecv3.02.pdf, 0.46 mb, Nov 27, 2013 ]

Case Study: UL Certified COMs Deliver Quality
[ wp_ul_2007.pdf, 0.13 mb, Nov 27, 2013 ]

Application Stories

Application Story German
[ saw-tobaccoland_dt.pdf, 0.68 mb, Nov 27, 2013 ]

Computer On Modules Magazine - 2007
With high scalability and Value-Add Service for your customized solution
[ computer_on_modules_brochure2007.pdf, 6.69 mb, Nov 27, 2013 ]

Services

Kontron Services Brochure
[ kontron-services-brochure.pdf, 0.37 mb, Nov 19, 2015 ]

More Downloads

All other downloads such as drivers, bios, drawings etc. are available on Kontron’s Customer Section

Variants

ETX® Eval
18010-0000-00-0
ETX® Eval ETX®-Eval, ATX sized evaluation board for ETX® modules. more
ETX®-CD
ETX®-CD Computer on Modules (COMs) are highly integrated component SBCs that support system expansion and application-specific customization  
ETX®-DC
ETX®-DC ETX®-DC with Atom™ technology for ETX 3.0 more
ETX®-LX
ETX®-LX ETX®-LX with AMD® Geode™ LX800 with 500 MHz and CS5536. more
ETX®-CN8
ETX®-CN8 With VIA C7® / Eden® processor, VIA CN896 and VIA VT8237S more

Accessories

KAB-ADAPT-LVDS
61032
KAB-ADAPT-LVDS Evaluation Board to adapt LVDS flatpanels via JILI cable. more
ETX Mounting Kit 3mm
18017-0000-00-0
ETX Mounting Kit 3mm ETX Mounting Kit 3mm  


back

Info Request

Contact Tech Support

Comparisons (up to 5 products)

There are currently no products in your Comparison.

Services

Customer Section

This section is exclusively for Kontron Customers. After registering you will gain access to BIOS images, product change notifications (PCNs), 3D models for CAD, and software development tools.

Click below to login or register.

*Please allow 24 hours to process your confirmation. You will be informed via email when your access to
the customer section is granted.

Stay connected