For Industrial Control, Defense, Oil&Gas, Mining, Transportation
CP3005-SA is the perfect choice for high performance applications, with an improved performance-per-watt compared to predecessors. The single-slot master CPU cards are based on 8th/9th Gen Intel® Core™ processors, with two up to six cores: Intel® Xeon® is perfect for high performance applications, especially for server platforms, Core™ i5 and i3 for any kind of industrial applications, and Celeron®, as value version, for low budget series with limited technical demands. Combined with Intel® UHD Graphics P630, CP3005-SA provides a new level of graphics performance compared to previous platform designs.
CP3005-SA is built to be used in demanding and harsh environments. It is designed for VITA47 EAC3 and a temperature range of -40°C up to +70°C. The processor’s TDP can be adjusted dynamically to a desired performance and power envelope. The maturity and future-openness of the CompactPCI formfactor is proven in all ECT markets. Typical applications can be found in:
Revolutionary flash capacities and doubled memory
Up to 32 GByte SDRAM of 2666 DDR4 speeds serve applications with high memory demands. Error Checking and Correction (ECC) is supported. Thanks to the formfactor M.2, revolutionary flash capacities of up to 512 GByte at 22x42 mm module size are market-available and enable use even for mass storage!
Variety of Interfaces and Options
The CP3005-SA supports up to three graphic ports VGA and 2x DVI, several USB 2.0 and 3.0, Gigabit Ethernet with Wake-over-LAN (WOL) option. Backwards compatibiliy is also granted - Kontron’s available Rear Transition Modules can be re-used. Expansion options are provided to carry a XMC module, or a 2.5” HDD or SSD, and additional M.2 modules of 22x80 mm size. PCI passive mode to run in peripheral slots, opens the door for Multi-CPU systems.
CP3005-SA is equipped with a Trusted Platform Module (TPM 2.0) for enhanced hardware and software based data and system security, such as secure boot and trusted boot.
10 years lifetime of CP3005-SA or even more, and Kontron’s commitment to a rich CompactPCI portfolio, make CP3005-SA a safe investment with low total-cost-of-ownership.
|Processor||8th Generation Intel® processor (14nm technology):
- Intel® Xeon® E-2176M, 6-Core, 2.7 GHz (base), 4.4 GHz (max),
with ECC, 12 MByte Cache
- Intel® Core™ i5-8400H, 4-Core, 2.5 GHz (base), 4.2 GHz (max),
no ECC, 8 MByte Cache
|Graphics||Intel® UHD Graphics P630 integrated
- up to 3x independent graphics outputs
- Supports DirectX® 12 and OpenGL 4.5
- VGA with a CRT monitor: tbd
- VGA with a LCD monitor: tbd
- DisplayPort: 4096 x 2304 pixels @ 60 Hz
|Watchdog||FPGA-based, timeout ranging from 125ms to 4096s programmable in 16
steps, IRQ, reset, dual-stage confi guration
|Ethernet||Intel® i210 and i219LM Ethernet controller: Up to three 1000BASE-T
interfaces, two front/rear switchable with WOL (Wake-on-LAN), third
available via 8HP extension CP3005-HDD
|Main Memory||Up to 32 GByte dual channel DDR4 SDRAM at 2400 MT/s, via two SODIMM
sockets, ECC support by Intel® Xeon® only
[ cp3005_20200121_datasheet.pdf, 0.55 mb, Jan 22, 2020 ]
All other downloads such as drivers, bios, drawings etc. are available on Kontron’s Customer Section
There are currently no products in your Comparison.
To find out more about our services go to services pages