kontron readme

CP6002 WXPE BSP

   Readme_CP6002_WXPE.htm file

   Edition 1
   2010-11-15
   ©by KONTRON MODULAR COMPUTERS 2010
  

Introduction




  Note: using this BSP requires a solid knowledge about Windows XP embedded and
  the Windows XP Embedded Design Suite! 

  This Board Support Package (BSP) supports the
  Kontron CP6002 board and associated rear I/O boards under Windows XP embedded.

  List of supported Kontron boards:
Kontron BoardRemark
CP6002 CPUBIOS B3401 13.00 x64
CP-RI06-001Rear I/O board
CP-RI06-A/BRear I/O boards
CP-RI06-MRear I/O board
(see also supported devices) The BSP contains files which will be imported into the WXPE Database repository and files (help files, demo source files etc.) which are not imported into the repository. (see BSP contents)

Contents of this readme file:

  
  • Installation
  • Notes
  • Restrictions
  • Version history
  • BSP contents
  • List of documentation files
  • Installation


       System Requirements: 
       Windows Embedded Standard 2009 or Windows XP Embedded SP3
    
       Installation procedure:
       - Create an empty directory folder and unpack the WXPE_BSP_CP6002_R10.zip file
         in this directory. 
       - Open the WXPe Database Manager.     
       - Import the CP6002.sld file into the Windows XP Embedded Database (for
         detailed instructions please see  UserGuide_SLD_import.chm file).
      

    back to contents list

    Notes


    
    
    
      
    BSP created with:Database update state:
    Windows Embedded Standard 2009 September 2010
    TPM Support
    TPM support is not contained as a Windows XP embedded
    component in this BSP. In case TPM support is wanted, download the CP6002 Windows XP 32bit Board Support Package
    from www.Kontron.com and install the
    Infineon� TPM HostSW package (located in that package) after the FBA has been finished.
    In case cloning of the image is required,
    run reseal and use the resulting image as Master Image.
    GRAPHICS
    After installation of Intel graphics device driver when
    selecting graphics properties via context sensitive menue
    on blank desktop screen may become black for around 2 seconds before opening graphics dialog boxes.
    This happens if only one graphic output device is connected to CP6002 system. It does not implicite a problem to the system.
    AUDIO Support
    The Audio components are needed only if the rear I/O board CP-RI06-A or -B is installed.
    Ethernet Teaming Support
    The Ethernet Teaming Component will start an interactive installation by a FBA command at phase 12300. After completion of the installation routine, ethernet teaming is available but not established. In order to establish ethernet teaming, open the device manager, open a network adapters properties and select the "Teaming" Tab. From here define the ethernet team.
    RAID/AHCI Support
    Before running the FBA the SataMode in the EFI shell must be set to "raid" or "ahci"

    back to contents list

    Restrictions


            The .net Framework 3.0 must be contained and installed in the target image for
            the Graphics user interface and the Rapid Storage user interface.
            (the graphics and RAID support components will add the .net Framework 3.0 component automatically)
            Installing procedure: 
            After booting into the Windows Embedded Standard operating system, manually 
            run the executable file dotnetfx3.exe, located in the Windows directory of 
            the target device (or the destination specified in the File Resource Properties 
            dialog box in Target Designer).
    
            
    back to contents list

    Version history


    Revision 10
      (Initial release)
    Supported DevicesSupport based on:
    Graphics Intel� Graphics Media Accelerator HD
    Chipset Intel� 5 Series/3400 Series Chipset Family
    Ethernet Intel� 82574L Gigabit Ethernet Controller including teaming
    KOM systems Kontron System Functions
    RAID /AHCIIntel� Rapid Storage Technology
    AudioSoundMAX Integrated Digital HD Audio

    back to contents list

    BSP contents


    
      The demo sources of the BSP are intended for demonstration purposes and as
      reference sources for developers. 
      
      These files are not required for a functional
      target image and therefore not imported into the repository. 
      
      All other files are required for support of the CP6002 board 
      and will be imported into the repository. 
      You will find a list of all files contained in this BSP below.
    
    Following files are not copied to the repository:
    
    
    SLD File and Readme
    CP6002.sld
    UserGuide_SLD_import.chm

    Demo SourcesVersion
    DemoSources\ICORE ----
    DemoSources\ICORE\BIN ----
    IOCTLKomCoreDemo.exe1.3.0.0
    DemoSources\ICORE\DEFS ----
    hwmon_common.h
    KomCoreIoctl.h
    DemoSources\ICORE\Help ----
    KomCore.chm
    DemoSources\ICORE\LIB ----
    KomCore.exp
    KomCore.lib
    DemoSources\ICORE\SRC ----
    KomCoreDemo.cpp
    KomCoreDemo.rc
    KomCoreStressDemo.cpp
    resource.h
    DemoSources\KOMmisc ----
    DemoSources\KOMmisc\BoardSettings ----
    BoardSettings.chm
    DemoSources\KOMmisc\BoardSettings\KomDio ----
    komdio.exp
    komdio.lib
    KomDioApi.chm
    KomDioDemo.cpp
    KomDioDemo.exe1.0.0.1
    KOMDIO_API.h1.0.0.1
    DemoSources\KOMmisc\BoardSettings\KomLed ----
    KomLED.exp
    KomLED.h
    KomLED.lib
    KomLedApi.chm
    KomLEDDemo.cpp
    KomLEDDemo.exe1.3.0.0
    DemoSources\KOMmisc\BoardSettings\KomRio ----
    KomRio.exp
    KomRio.h
    KomRio.lib
    KomRioApi.chm
    KomRioDemo.cpp
    KomRioDemo.exe1.2.0.0
    DemoSources\KOMmisc\BoardSettings\KomSys ----
    KomSys.exp
    KomSys.h
    KomSys.lib
    KomSysApi.chm
    KomSysDemo.cpp
    KomSysDemo.exe1.2.0.0
    DemoSources\KOMmisc\BoardSettings\KomWdg ----
    KomWdg.exp
    KomWdg.h
    KomWdg.lib
    KomWdgApi.chm
    KomWdgDemo.cpp
    KomWdgDemo.exe1.2.0.0
    Files copied to the repository:
    File nameVersion
    1028.mst
    1031.mst
    1033.mst
    1034.mst
    1036.mst
    1040.mst
    1041.mst
    1042.mst
    1046.mst
    2052.mst
    ADIHdAud.inf
    ADIHdAud.sys5.10.1.9999
    ANS.cab
    ANSM2KXP.INF
    ANSP2KXP.INF
    AudioInstall.exe4.65.0.0
    b3001.inf
    BoardSettings.chm
    BoardSettings.exe1.3.0.0
    custom.ini
    devcon.exe5.2.3790.1830
    difx32.dll2.1.0.0
    DMIX.cab
    DxSetup.exe0.0.0.0
    DxSetup.ini
    DxSysChk.exe12.3.0.0
    DxSysChk.ini
    e1q5132.cat
    e1q5132.din
    e1q5132.inf
    e1q5132.sys11.4.7.0
    e1qmsg.dll10.0.20.0
    eth_teaming.bat
    Gfxres.ar-SA.resources
    Gfxres.cs-CZ.resources
    Gfxres.da-DK.resources
    Gfxres.de-DE.resources
    Gfxres.el-GR.resources
    Gfxres.en-US.resources
    Gfxres.es-ES.resources
    Gfxres.fi-FI.resources
    Gfxres.fr-FR.resources
    Gfxres.he-IL.resources
    Gfxres.hu-HU.resources
    Gfxres.it-IT.resources
    Gfxres.ja-JP.resources
    Gfxres.ko-KR.resources
    Gfxres.nb-NO.resources
    Gfxres.nl-NL.resources
    Gfxres.pl-PL.resources
    Gfxres.pt-BR.resources
    Gfxres.pt-PT.resources
    Gfxres.ru-RU.resources
    Gfxres.sk-SK.resources
    Gfxres.sl-SI.resources
    Gfxres.sv-SE.resources
    Gfxres.th-TH.resources
    Gfxres.tr-TR.resources
    Gfxres.zh-CN.resources
    Gfxres.zh-TW.resources
    gfxSrvc.dll6.14.10.5189
    GfxUI.exe6.14.10.5189
    GfxUI.exe.config
    hccutils.dll6.14.10.5189
    Help.cab
    hkcmd.exe6.14.10.5189
    iaAHCI.cat
    iaAHCI.inf
    ians2kxp.cat
    iansmsg.dll9.5.0.0
    ianswxp.sys8.6.19.0
    iaStor.cat
    iaStor.inf
    iaStor.sys9.5.0.1037
    iata_cd.exe12.0.0.49974
    ibexahci.cat
    ibexahci.inf
    ibexcore.cat
    ibexcore.inf
    ibexid2.cat
    ibexid2.inf
    ibexide.cat
    ibexide.inf
    ibexsmb.cat
    ibexsmb.inf
    ibexusb.cat
    ibexusb.inf
    ig4dev32.dll6.14.10.5189
    ig4icd32.dll6.14.10.5189
    igcompkrng500.bin
    igcompkrng575.bin
    igfxcpl.cpl6.14.10.5189
    igfxdev.dll6.14.10.5189
    IGFXDEVLib.dll1.0.0.0
    igfxdo.dll6.14.10.5189
    igfxexps.dll6.14.10.5189
    igfxext.exe6.14.10.5189
    igfxnt5.cat
    igfxpers.exe6.14.10.5189
    igfxpph.dll6.14.10.5189
    igfxrara.lrc6.14.10.5189
    igfxrchs.lrc6.14.10.5189
    igfxrcht.lrc6.14.10.5189
    igfxrcsy.lrc6.14.10.5189
    igfxrdan.lrc6.14.10.5189
    igfxrdeu.lrc6.14.10.5189
    igfxrell.lrc6.14.10.5189
    igfxrenu.lrc6.14.10.5189
    igfxresn.lrc6.14.10.5189
    igfxress.dll6.14.10.5189
    igfxrfin.lrc6.14.10.5189
    igfxrfra.lrc6.14.10.5189
    igfxrheb.lrc6.14.10.5189
    igfxrhun.lrc6.14.10.5189
    igfxrita.lrc6.14.10.5189
    igfxrjpn.lrc6.14.10.5189
    igfxrkor.lrc6.14.10.5189
    igfxrnld.lrc6.14.10.5189
    igfxrnor.lrc6.14.10.5189
    igfxrplk.lrc6.14.10.5189
    igfxrptb.lrc6.14.10.5189
    igfxrptg.lrc6.14.10.5189
    igfxrrus.lrc6.14.10.5189
    igfxrsky.lrc6.14.10.5189
    igfxrslv.lrc6.14.10.5189
    igfxrsve.lrc6.14.10.5189
    igfxrtha.lrc6.14.10.5189
    igfxrtrk.lrc6.14.10.5189
    igfxsrvc.dll6.14.10.5189
    igfxsrvc.exe6.14.10.5189
    igfxtray.exe6.14.10.5189
    igkrng400.bin
    igkrng500.bin
    igkrng575.bin
    igxp32.inf
    igxpco32.dll1.2.1.0
    igxpdv32.dll6.14.10.5189
    igxpdx32.dll6.14.10.5189
    igxpgd32.dll6.14.10.5189
    igxpmp32.sys6.14.10.5189
    igxprd32.dll6.14.10.5189
    igxpun.exe1.2.29.0
    igxpxa32.cpa
    igxpxa32.vp
    igxpxk32.vp
    igxpxs32.vp
    impcd.cat
    Impcd.inf
    Impcd.sys1.0.1.1002
    intelcp2.cat
    IntelCP2.inf
    IPMINull.bat
    iSCSDump.sys2.1.15.3
    komcore.cat
    KomCore.dll1.0.1.0
    KomCore.inf
    KomCore.sys2.1.0.0
    komdio.dll1.2.0.0
    KomLED.dll1.5.0.0
    KOMMisc.sys1.3.0.0
    KomRio.dll1.2.0.0
    KomSys.dll1.4.0.0
    KomWdg.dll1.4.0.0
    LR_DMIX.cab
    mixer.ini
    Ncs2Setp.dll14.9.64.0
    nicco2.dll1.2.0.0
    NicCo36.dll2.1.2.0
    NicInstQ.dll9.10.27.0
    null.inf
    oemdspif.dll6.14.10.5189
    OemVer.reg
    PRONtObj.dll6.1.1.0
    PROSETDX.msi
    Readme_WXP_IPMI_Null_R10.txt
    setup.cab
    smx.cat
    SNMP.cab
    TXTSETUP.OEM
    VC90_CRT_x86.msi
    WdfCoInstaller01007.dll1.7.6001.18000

    back to contents list

    List of documentation files


    List of documentation and help files included
    in this BSP:
    
    UserGuide_SLD_import.chmHelp file for importing this BSP into the WXPe database
    BoardSettings.chmHelp file for the KOM system functions application
    KomDioApi.chmKOM system functions API help
    KomLedApi.chmKOM system functions API help
    KomRioApi.chmKOM system functions API help
    KomSysApi.chmKOM system functions API help
    KomWdgApi.chmKOM system functions API help
    KomCore.chmAPI help for KOMCore driver functions

    back to contents list