kontron readme
AM4020 WXPE BSP
Readme_AM4020_WXPE.htm file
Edition 1
2010-05-20
©by KONTRON MODULAR COMPUTERS 2010
Note: using this BSP requires a solid knowledge about Windows XP embedded and
the Windows XP Embedded Design Suite!
This Board Support Package (BSP) supports the
Kontron AM4020 for Windows XP embedded.
(see List of supported Kontron Boards and supported devices)
The BSP contains files which will be imported into the WXPE Database repository
and files (help files, demo source files etc.) which are not imported into the
repository.
(see BSP contents)
Installation
Notes
Restrictions
Version history
BSP contents
List of documentation files
System Requirements:
Windows XP Embedded Design Suite
Installation procedure:
- Import the AM4020.sld file into the Windows XP Embedded Database (for
detailed instructions please see UserGuide_SLD_import.chm file).
back to contents list
The release of this BSP is valid for:
| Kontron Board | BIOS Version |
| AM4020 | B3001 11.00 x64(or higher) |
| BSP created with: | Database update state: |
| Windows XP embedded SP3 with Feature Pack 2007 | March 2010 |
TPM Support
TPM support is not contained as a Windows XP embedded
component in this BSP.
In case TPM support is wanted, install the
Infineon� TPM HostSW package (located under the
folder "TPM" in this BSP) after the FBA has been finished.
In case cloning of the image is required,
run reseal and use the resulting image as Master Image.
back to contents list
- The .Net Framework 3.0 must be contained in the target image for use of
the Graphics user interface, the TPM user interface and the Rapid Storage user interface.
- The Windows XPe boot process may be delayed for approximately 90 seconds if at least one of the
two backplane network ports have negotiated a valid Ethernet link to an MCH (MicroTCA Controller Hub)
which is not connected to a network resp. a DHCP server.
During the boot delay, the system seems to be frozen and not operable. In order to overcome the
situation, you may either disable the corresponding backplane network port e.g. via Windows device manager)
or must assign a static IP address instead of using DHCP (default setting).
back to contents list
Revision 10
(Initial release)
| Supported Devices | Support based on: |
| Graphics | Intel� Graphics Media Accelerator HD |
| Chipset | Intel� 5 Series/3400 Series Chipset Family |
| Ethernet | Intel� 82580 Gigabit Ethernet Controller including teaming |
| KOM systems | Kontron System Functions |
| RAID /AHCI | Intel� Rapid Storage Technology |
| TPM | Infineon� TPM HostSW |
back to contents list
Part of the BSP files are intended for demonstration purposes and as
reference sources for developers. These file are not imported into the
repository. All other files are required for support of the AM4020 board
family and will be imported into the repository. You will find a list of all files
contained in this BSP below.
Following files are not copied to the repository:
| SLD File and Readme | |
| AM4020.sld | |
| UserGuide_SLD_import.chm | |
| TPM support * | |
| TPM_HostSW_3.6_IFX_RTM.zip | |
* see Note.
| Demo Sources | Version |
|
| ICORE ---- | |
|
| ICORE\BIN ---- | |
| IOCTLKomCoreDemo.exe | 1.2.0.0 |
|
| ICORE\DEFS ---- | |
| KomCoreIoctl.h | |
|
| ICORE\Help ---- | |
| KomCore.chm | |
|
| ICORE\LIB ---- | |
| KomCore.exp | |
| KomCore.lib | |
|
| ICORE\SRC ---- | |
| KomCoreDemo.cpp | |
| KomCoreDemo.rc | |
| KomCoreStressDemo.cpp | |
| resource.h | |
|
| KOMmisc ---- | |
|
| KOMmisc\BoardSettings ---- | |
| BoardSettings.chm | |
|
| KOMmisc\BoardSettings\KomDio ---- | |
| komdio.exp | |
| komdio.lib | |
| KomDioApi.chm | |
| KomDioDemo.cpp | |
| KomDioDemo.exe | 1.0.0.1 |
| KOMDIO_API.h | 1.0.0.1 |
|
| KOMmisc\BoardSettings\KomLed ---- | |
| KomLED.exp | |
| KomLED.h | |
| KomLED.lib | |
| KomLedApi.chm | |
| KomLEDDemo.cpp | |
| KomLEDDemo.exe | 1.2.0.0 |
|
| KOMmisc\BoardSettings\KomRio ---- | |
| KomRio.exp | |
| KomRio.h | |
| KomRio.lib | |
| KomRioApi.chm | |
| KomRioDemo.cpp | |
| KomRioDemo.exe | 1.2.0.0 |
|
| KOMmisc\BoardSettings\KomSys ---- | |
| KomSys.exp | |
| KomSys.h | |
| KomSys.lib | |
| KomSysApi.chm | |
| KomSysDemo.cpp | |
| KomSysDemo.exe | 1.2.0.0 |
|
| KOMmisc\BoardSettings\KomWdg ---- | |
| KomWdg.exp | |
| KomWdg.h | |
| KomWdg.lib | |
| KomWdgApi.chm | |
| KomWdgDemo.cpp | |
| KomWdgDemo.exe | 1.2.0.0 |
Files copied to the repository:
| File name | Version |
| 1028.mst | |
| 1031.mst | |
| 1033.mst | |
| 1034.mst | |
| 1036.mst | |
| 1040.mst | |
| 1041.mst | |
| 1042.mst | |
| 1046.mst | |
| 2052.mst | |
| ANS.cab | |
| ANSM2KXP.INF | |
| ANSP2KXP.INF | |
| b3001.inf | |
| BoardSettings.chm | |
| BoardSettings.exe | 1.3.0.0 |
| custom.ini | |
| devcon.exe | 5.2.3790.1830 |
| difx32.dll | 2.1.0.0 |
| DMIX.cab | |
| DxSetup.exe | 0.0.0.0 |
| DxSetup.ini | |
| DxSysChk.exe | 12.3.0.0 |
| DxSysChk.ini | |
| e1r5132.cat | |
| e1r5132.din | |
| e1r5132.inf | |
| e1r5132.sys | 11.4.16.0 |
| e1rmsg.dll | 10.0.22.0 |
| Gfxres.ar-SA.resources | |
| Gfxres.cs-CZ.resources | |
| Gfxres.da-DK.resources | |
| Gfxres.de-DE.resources | |
| Gfxres.el-GR.resources | |
| Gfxres.en-US.resources | |
| Gfxres.es-ES.resources | |
| Gfxres.fi-FI.resources | |
| Gfxres.fr-FR.resources | |
| Gfxres.he-IL.resources | |
| Gfxres.hu-HU.resources | |
| Gfxres.it-IT.resources | |
| Gfxres.ja-JP.resources | |
| Gfxres.ko-KR.resources | |
| Gfxres.nb-NO.resources | |
| Gfxres.nl-NL.resources | |
| Gfxres.pl-PL.resources | |
| Gfxres.pt-BR.resources | |
| Gfxres.pt-PT.resources | |
| Gfxres.ru-RU.resources | |
| Gfxres.sk-SK.resources | |
| Gfxres.sl-SI.resources | |
| Gfxres.sv-SE.resources | |
| Gfxres.th-TH.resources | |
| Gfxres.tr-TR.resources | |
| Gfxres.zh-CN.resources | |
| Gfxres.zh-TW.resources | |
| gfxSrvc.dll | 6.14.10.5189 |
| GfxUI.exe | 6.14.10.5189 |
| GfxUI.exe.config | |
| hccutils.dll | 6.14.10.5189 |
| Help.cab | |
| hkcmd.exe | 6.14.10.5189 |
| iaAHCI.cat | |
| iaAHCI.inf | |
| ians2kxp.cat | |
| iansmsg.dll | 9.5.0.0 |
| ianswxp.sys | 8.6.19.0 |
| iaStor.cat | |
| iaStor.inf | |
| iaStor.sys | 9.5.0.1037 |
| iata_cd.exe | 12.0.0.49974 |
| ibexahci.cat | |
| ibexahci.inf | |
| ibexcore.cat | |
| ibexcore.inf | |
| ibexid2.cat | |
| ibexid2.inf | |
| ibexide.cat | |
| ibexide.inf | |
| ibexsmb.cat | |
| ibexsmb.inf | |
| ibexusb.cat | |
| ibexusb.inf | |
| ig4dev32.dll | 6.14.10.5189 |
| ig4icd32.dll | 6.14.10.5189 |
| igcompkrng500.bin | |
| igcompkrng575.bin | |
| igfxcpl.cpl | 6.14.10.5189 |
| igfxdev.dll | 6.14.10.5189 |
| IGFXDEVLib.dll | 1.0.0.0 |
| igfxdo.dll | 6.14.10.5189 |
| igfxexps.dll | 6.14.10.5189 |
| igfxext.exe | 6.14.10.5189 |
| igfxnt5.cat | |
| igfxpers.exe | 6.14.10.5189 |
| igfxpph.dll | 6.14.10.5189 |
| igfxrara.lrc | 6.14.10.5189 |
| igfxrchs.lrc | 6.14.10.5189 |
| igfxrcht.lrc | 6.14.10.5189 |
| igfxrcsy.lrc | 6.14.10.5189 |
| igfxrdan.lrc | 6.14.10.5189 |
| igfxrdeu.lrc | 6.14.10.5189 |
| igfxrell.lrc | 6.14.10.5189 |
| igfxrenu.lrc | 6.14.10.5189 |
| igfxresn.lrc | 6.14.10.5189 |
| igfxress.dll | 6.14.10.5189 |
| igfxrfin.lrc | 6.14.10.5189 |
| igfxrfra.lrc | 6.14.10.5189 |
| igfxrheb.lrc | 6.14.10.5189 |
| igfxrhun.lrc | 6.14.10.5189 |
| igfxrita.lrc | 6.14.10.5189 |
| igfxrjpn.lrc | 6.14.10.5189 |
| igfxrkor.lrc | 6.14.10.5189 |
| igfxrnld.lrc | 6.14.10.5189 |
| igfxrnor.lrc | 6.14.10.5189 |
| igfxrplk.lrc | 6.14.10.5189 |
| igfxrptb.lrc | 6.14.10.5189 |
| igfxrptg.lrc | 6.14.10.5189 |
| igfxrrus.lrc | 6.14.10.5189 |
| igfxrsky.lrc | 6.14.10.5189 |
| igfxrslv.lrc | 6.14.10.5189 |
| igfxrsve.lrc | 6.14.10.5189 |
| igfxrtha.lrc | 6.14.10.5189 |
| igfxrtrk.lrc | 6.14.10.5189 |
| igfxsrvc.dll | 6.14.10.5189 |
| igfxsrvc.exe | 6.14.10.5189 |
| igfxtray.exe | 6.14.10.5189 |
| igkrng400.bin | |
| igkrng500.bin | |
| igkrng575.bin | |
| igxp32.inf | |
| igxpco32.dll | 1.2.1.0 |
| igxpdv32.dll | 6.14.10.5189 |
| igxpdx32.dll | 6.14.10.5189 |
| igxpgd32.dll | 6.14.10.5189 |
| igxpmp32.sys | 6.14.10.5189 |
| igxprd32.dll | 6.14.10.5189 |
| igxpun.exe | 1.2.29.0 |
| igxpxa32.cpa | |
| igxpxa32.vp | |
| igxpxk32.vp | |
| igxpxs32.vp | |
| impcd.cat | |
| Impcd.inf | |
| Impcd.sys | 1.0.1.1002 |
| intelcp2.cat | |
| IntelCP2.inf | |
| IPMINull.bat | |
| iSCSDump.sys | 2.1.15.3 |
| komcore.cat | |
| KomCore.dll | 1.0.1.0 |
| KomCore.inf | |
| KomCore.sys | 2.1.0.0 |
| komdio.dll | 1.2.0.0 |
| KomLED.dll | 1.5.0.0 |
| KOMMisc.sys | 1.3.0.0 |
| KomRio.dll | 1.2.0.0 |
| KomSys.dll | 1.4.0.0 |
| KomWdg.dll | 1.4.0.0 |
| LR_DMIX.cab | |
| Ncs2Setp.dll | 14.9.64.0 |
| nicco2.dll | 1.2.0.0 |
| NicCo36.dll | 2.1.2.0 |
| NicInE1R.dll | 9.10.27.0 |
| null.inf | |
| oemdspif.dll | 6.14.10.5189 |
| OemVer.reg | |
| PRONtObj.dll | 6.1.1.0 |
| PROSETDX.msi | |
| Readme_WXP_IPMI_Null_R10.txt | |
| setup.cab | |
| SNMP.cab | |
| TXTSETUP.OEM | |
| VC90_CRT_x86.msi | |
| WdfCoInstaller01007.dll | 1.7.6001.18000 |
|
back to contents list
List of documentation and help files included
in this BSP:
| UserGuide_SLD_import.chm | | Help file for importing this BSP into the WXPe database |
| BoardSettings.chm | | Help file for the KOM system functions application |
| KomDioApi.chm | | KOM system functions API help |
| KomLedApi.chm | | KOM system functions API help |
| KomRioApi.chm | | KOM system functions API help |
| KomSysApi.chm | | KOM system functions API help |
| KomWdgApi.chm | | KOM system functions API help |
| KomCore.chm | | API help for KOMCore driver functions |
back to contents list