Products
Industries
IoT
One of the new challenges arising with the use of edge, fog, and cloud architectures is the connection of components to each other and to the public cloud. An important element of developing a solution capturing all pieces is the IoT framework susietec
At the field, or edge level, data is collected by industrial computers, e.g. by gateways, which process, filter, analyze and act on these data in real-time right at the device.
Edge, fog and cloud applications demand increasing computing power. The interfaces to sensors or machines often require non-standard solutions. Especially in smaller machines, space is limited or restricted in some dimension and need a special solution.
Today, the connection from the sensor device to the embedded cloud takes place via real-time data communication, on sensor and edge level - for example Industrial Ethernet or fieldbuses - and gateways , which provide the transformation of real time data into the informational area.
Support & Services
Contact
For support related inquires, please contact our support team:
Contact Support
Downloads
We provide our customers with additional material enhancing their knowledge. Find all White Papers, Use Cases and brochures here.
Learn more about how Kontron supports its customers by improving their products and solutions. Read our Use Cases. Contact us for further information.
Learn more about our solutions for various industries by downloading our Whitepapers.
We provide our customers with additional material enhancing their knowledge. Find all White Papers, Use Cases and brochures here.
Get extended insights into our products and solutions by participating in our webcasts. You can find all webcasts here. Contact us for further information.
Learn more about our solutions for various industries by downloading our Whitepapers.
Targeting the Optimum
CompactPCI computer with processor socket
Eching, Germany, 12 March 2002 - With the CPU boards CP301, CP302 and CP303 Kontron Embedded Computers offers especially rugged CompactPCI computers. Now, the new member of this CPU family, the CP304, goes even further than the other members of the family in fulfilling the customer demands for the most flexible selection possible for computing power and memory capacity.
In contrast to the CPUs of the 300 Family Kontron has equipped the CP304 with a processor socket. All Pentium III processors in the FC-PGA and FC-PGA2 cases are supported: From Celeron with 566 MHz and 128 KB L2 cache, through the Pentium III with 256 KB to the latest Intel. Pentium. III-S processor with 512 KB. The synchronous DRAM memory (max. 512 MB) operates at 133 MHz and is accommodated in a SODIMM socket.
Apart from the flexible computing power, the communication possibilities predestine the CompactPCI computer for applications in machine controllers or for constructing compact servers: Along with two Ethernet channels, the CompactPCI board offers two USB connections, two COM interfaces as well as a VGA-CRT or a DVI connector on the handle strip.
The new board is passively cooled and is available in a width of 8 pitch units and can alternatively be equipped with CompactFlash or a HDD microdrive up to 1 Gbyte or a 2.5 inch HDD.
For saving BIO settings and VxWorks boot parameters, the board has an E2PROM and a 2 Mbyte flash memory. Also, Kontron offers for the computer an extension of the standard BIOS to incorporate an Ethernet boot and preboot agent.
The single-height CP304 CompactPCI Computer will be available from May 2002.
